[Nov 07, 2024] Uplift Your H12-831_V1.0-ENU Exam Marks With The Help of H12-831_V1.0-ENU Dumps
Use Huawei H12-831_V1.0-ENU Dumps To Succeed Instantly in H12-831_V1.0-ENU Exam
Huawei H12-831_V1.0-ENU Exam is a rigorous exam that requires a thorough understanding of advanced routing and switching technologies. H12-831_V1.0-ENU exam is designed to test the candidate's knowledge of a wide range of topics, including the principles of routing and switching, network planning and design, network security, and troubleshooting. H12-831_V1.0-ENU exam is also designed to test the candidate's ability to implement and maintain complex networks, and to troubleshoot network issues in a timely and effective manner.
Huawei is a leading provider of networking and telecommunications equipment and solutions. The Huawei H12-831_V1.0 certification exam is a testament to the company's commitment to providing high-quality products and services to its customers. By obtaining this certification, IT professionals can demonstrate their proficiency in using Huawei devices and technologies to design, deploy, and manage complex network infrastructures.
NEW QUESTION # 23
The link state value information between different ISIS processes of multiple routers is considered to be isolated.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 24
(Connection) The default MPLS label release method and label distribution control method of Huawei routers and label retention methods are respectively
Answer:
Explanation:
NEW QUESTION # 25
(Drag and drop) As shown in the figure, there is a message containing three-layer label headers. Please select the corresponding values of the X, Y, and Z fields in the figure. (Decimal)
Answer:
Explanation:
NEW QUESTION # 26
What is the value of OSPF and BFD linkage?
- A. Through the BFD detected at the millisecond level, the OSPF status is associated to achieve the purpose of OSPF quickly inductive link state
- B. Any change in the BFD status will not affect the OSPF neighbor status
- C. The hello sending interval of OSPF is at the second level, which is faster than BFD inductive link state
- D. The sending interval of BFD packets can reach the millisecond level, which is slower than the OSPF inductive link state
Answer: A
NEW QUESTION # 27
When deploying BGPIMPLS IPVPN, when two VPNs have a common site, the common site must not use overlapping address space with other sites of the two VPNs.
- A. False
- B. True
Answer: A
NEW QUESTION # 28
As shown in the figure, the network has caused a loop because STP is not enabled. Which of the following phenomena may be caused? (Multiple choice)
- A. The device will have a loop alarm
- B. A large number of broadcasts can be received on the Host
- C. The device CPU usage is too high
- D. MAC address table flapping
Answer: A,B,C,D
NEW QUESTION # 29
A campus has deployed IPv6 for service testing. There are 4 routers in the network, running 0SPFv3 to implement IPv6 network interconnection. As shown in the figure, an engineer checked the LSDB of R2 and intercepted one of the Link-LSAs. Which of the following statements is true about the description of this LSA?
- A. The link-local address of R2 interface GEO/0/0 is: FE80::2E0:FCFF:FEC, D:4F79
- B. The router that generates this LSA is R2 port R2 connected
- C. IPv6 address prefix for GEO/0/0: 2001:DB8:2345:23::/64
- D. The SA shows 2 does not support external routing, but participates in IPv6 routing calculation
Answer: A,B,C
NEW QUESTION # 30
As shown in the figure, R1, R2, R3, and R4 are in the same MPLS domain, and LDP is used to allocate MPLS labels between devices. R4 is the FEC Egress LSR of 4.4.4.0/24. If you want to realize that when R1 accesses 4.4.4.0/24, R4 does not need to query the label table but can understand the forwarding priority of the data, then R3's outgoing label for the FEC should be (). (Please fill in the Arabic numerals directly, without symbols)
Answer:
Explanation:
0
NEW QUESTION # 31
In the test phase of cutover, which standards that can indicate the test has been completed?
- A. The configuration check result of the IP device is normal as the standard
- B. Test network business as normal as the standard
- C. The upper-layer application service test carried by the network is normal as the standard
- D. Check that the network is running normally as a standard
Answer: C
NEW QUESTION # 32
A router Network LSA is shown in the figure. Which of the following statements is correct? (Multiple choice)
- A. This router is DR
- B. The Router ID of this router is 10.0.12.2
- C. The network segment where the router is located is 10.0.12.0 24
- D. The DR priority of the router is 100
Answer: A,B,C
NEW QUESTION # 33
From this picture, we can judge
<Redisplay ipv6 routing table protocolTuozhen
Public Routing Table . ISIS
Summary Count 6
ISIS Routing Table's Status : < Active >
Summary Count 6
- A. R1The type of device is definitely notLevel-1
- B. R1noIS-ISofIPv6routing
- C. R1have6stripIS-ISofIPv6routing
- D. R1ofGigabitEthernetOD/1must be enabledIS-IS IPv6
Answer: A,C,D
NEW QUESTION # 34
From the user's point of view, any phenomenon that affects the business can be defined as a failure.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 35
According to this figure, which of the following is the correct description of the IPv6 routing information calculated by the R4 router through IS-IS?
- A. R4 has 2 equal-cost IS-IS default routes
- B. R4 has no IS-IS routing entry
- C. R4 has 2 unequal IS-IS default routes
- D. R4 has 1 IS-IS default route
Answer: A
NEW QUESTION # 36
By default, which of the following secure MAC address types will be lost after the device restarts?
- A. Secure static MAC address
- B. Secure dynamic MAC address
- C. Black hole MAC address
- D. Sticky MAC address
Answer: B
NEW QUESTION # 37
Part of the configuration of R1 is as follows. Which statement about IS-IS on R1 is correct?
3vpn-instarwce rr
level- 2
cost-style wide
-erntity 47.ccOa 3eft)btxlci-dael
- A. process1Contains only global routing information
- B. process2with process3routing information will be shared
- C. process1Also contains global routing information. andVRFtt,rrrouting information
- D. process2with process3The routing information is isolated
Answer: A,D
NEW QUESTION # 38
When there are multiple redundant links in the IS-S network, multiple equal-cost routes may appear.
Regarding equal-cost routes in an IS-IS network, which of the following descriptions is wrong?
- A. After the equal-cost routing priority is configured, when the IS-IS device forwards the traffic that reaches the destination network segment, it will not adopt the load sharing method, but will forward the traffic to the next-hop with the highest priority.
- B. For each route in the equal-cost route, the priority can be specified, and the route with the higher priority will be preferred. The rest are used as backup routes
- C. When the number of equal-cost routes in the networking is greater than the number configured through commands, and the priorities of these routes are the same, the route with the higher System ID of the next hop device is preferred for load sharing
- D. If negative arbitration sharing is configured, the traffic will be evenly distributed to each link
Answer: A
NEW QUESTION # 39
As shown in the figure, OSPF is deployed in a campus, and Area 1 is deployed as an NSSA are a. In the case of missing header, R2 will automatically generate a missing header route of Type 7 LSA and flood it in the NSSA area
- A. False
- B. True
Answer: B
NEW QUESTION # 40
......
Huawei H12-831_V1.0: HCIP-Datacom-Advanced Routing & Switching Technology V1.0 is an advanced-level certification course designed for network engineers and IT professionals who want to gain expertise in advanced routing and switching technologies. H12-831_V1.0-ENU exam provides a comprehensive understanding of the latest technologies and protocols used in the industry, ensuring that candidates are well-equipped to handle complex networking scenarios.
Huawei Dumps - Learn How To Deal With The Exam Anxiety: https://actual4test.exam4labs.com/H12-831_V1.0-ENU-practice-torrent.html