Get Instant Access of 100% Real Cisco 300-610 Exam Questions with Verified Answers
Exam Dumps for the Preparation of Latest 300-610 Exam Questions
Cisco 300-610 Exam Topics
Compute Design (25%)
Storage Network Design (20%)
Network Design (35%)
Automation Design (20%)
NEW QUESTION 101
An engineer must design a disaster recovery solution for a Cisco ACI Multi-Site network. One requirement is that the applications must have seamless IP addressing across sites. The solution must also be highly resilient and support Layer 2 adjacency. Which design meets these requirements?
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: A
NEW QUESTION 102
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION 103
An engineer must design a solution based on Cisco Nexus 7709 Switches. The solution must connect test and development network segments and separate the enterprise applications from the production network. The network security team requires routing instances and the IP stack to be completely separated from each other and for traffic between the environments to undergo a deep packet inspection. The development team also requests the ability to allocate additional physical interfaces from the Cisco Nexus 7709 device in each environment.
Which solution meets these requirements?
- A. 1) Enable new routing instances for the testing and development environments in the same VDC.
2) Control reachability by using firewall access policies. - B. 1) Assign a separate VDC for the testing and development environments.
2. Place a firewall between the VDCs. - C. 1) Create a VRF for the testing and development environments.
2) Use ACLs to control traffic between the two environments. - D. 1) Create a separate VRF for the testing and development environments.
2) Control reachability by using firewall access policies.
Answer: D
NEW QUESTION 104
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION 105
A network engineer is using a Cisco UCS environment connected to a Fibre Channel storage array. The Cisco UCS environment must be connected to an existing SAN network, and several Cisco MDS 9000 Series Switches must be added to increase storage density. The solution must not exhaust the SAN network from the list of available domain IDs after connecting Also, most of the SAN traffic must be mapped from the Cisco UCS blades to a specific group of the fabric interconnect ports Which two features must be deployed to meet these requirements? (Choose two.)
- A. dynamic port pinning
- B. static PIN grouping
- C. N-Port lD virtualization
- D. priority flow control
- E. end host mode
Answer: C,E
NEW QUESTION 106
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)
- A. VRF-Lite interfaces can be Layer 2.
- B. Interfaces that belong to VRFs can be physical or logical.
- C. Overlapping IP addresses are permitted on different VRFs.
- D. VRF-Lite interfaces support MPLS.
- E. Layer 3 interfaces can belong to multiple VRFs.
Answer: B,C
NEW QUESTION 107
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION 108
A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?
- A. vPC
- B. physical port
- C. port channel
- D. virtual interface
Answer: D
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-6300-series- fabric-interconnects/cisco-unified-fabric.pdf
NEW QUESTION 109
An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes, in addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6.
Which two components should be used to meet these requirements? (Choose two.)
- A. Telnet protocol
- B. SVI interface
- C. mgmt0 interface
- D. SNMP
- E. SSH protocol
Answer: D,E
NEW QUESTION 110
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION 111
A client in a commercial building Installs a Cisco blade server in the multitenant Cisco UCS blade Infrastructure. To cut operating costs me client's data center is shared with other organizations. The client asks an engineer prevent third parties from accessing their equipment and from accessing BlOS-related information when booting a server. Which Two policies must be used to meet these requirements? (Choose two.)
- A. post error pause
- B. quiet boot
- C. front panel lockout
- D. CDN control
- E. ASPM support
Answer: B,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Server-Mgmt/3-2/b_Cisco_UCS_Manager_Server_Mgmt_Guide_3_2/b_Cisco_UCS_Manager_Server_Mgmt_Guide_3_2_chapter_01110.html Quiet boot is what the BIOS displays during booting the server. If enabled, the BIOS displays the logo screen.
I believe that quiet boot and CDN control may have the customer name.
NEW QUESTION 112
DRAG DROP
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Select and Place:
Answer:
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fs_bfd.html#wp1238898
NEW QUESTION 113
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION 114
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?
- A. Cisco CloudCenter
- B. Cisco Data Center Network Manager
- C. Cisco Virtual Topology System
- D. Cisco Nexus Fabric Manager
Answer: B
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/DCNM_OLH/SAN_Client/fmhelp/ fmc.html#34479
NEW QUESTION 115
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. cross-connections with pinning
- B. Ethernet and unified ports on the same port channel
- C. VSS that has unified uplinks
- D. vPC that has unified uplinks
Answer: D
Explanation:
Section: Storage Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc11
NEW QUESTION 116
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects?
(Choose two.)
- A. STP runs on the uplink ports of each VLAN, as defined by MSTP.
- B. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
- C. STP runs on the server ports.
- D. The STP parameter configuration is supported.
- E. The STP parameter configuration is unsupported.
Answer: B,E
NEW QUESTION 117
A cloud service provider is managing day-2 operations of over 200 blade servers installed in the Cisco UCS environment. This pool of network resources is providing virtual networks to their customers. To successfully operate this environment, frequent changes to vNICs and other operational policies are required across multiple UCS domains. The operations team must streamline these repetitive tasks. Which orchestration tool must be used to meet this requirement?
- A. Cisco UCS Director
- B. Cisco DAN Center
- C. Cisco UCS Manager
- D. Cisco ACI Multisite Orchestrator
Answer: D
NEW QUESTION 118
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION 119
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?
- A. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.
- B. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
- C. A separate DSCP value must be configured for all FCIP VSAN traffic.
- D. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
Answer: A
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ ipsvc/nxos/ipsvc/cfcip.html
NEW QUESTION 120
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Run the disable fips-mode command on each fabric interconnect.
- B. Run the connect local-management command on each fabric interconnect.
- C. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- D. Erase the configuration of both fabric interconnects.
Answer: C
Explanation:
Section: Compute Design
NEW QUESTION 121
Refer to the exhibit.
What must be the default gateway of the servers in EPG Web?
- A. subnet address of BD2
- B. subnet address of L3Out
- C. NAT appliance
- D. subnet address of BD1
Answer: C
NEW QUESTION 122
A storage engineer requires a solution that achieves multiple paths between a server and storage array. The design must support complete traffic isolation and support a 50% growth in the next year. Which FCoE solution meets these requirements?
- A. at least two FC zone sets with multiple zones
- B. at least two VSANs across the fabric
- C. single VSAN across the fabric
- D. single switch with multiple links
Answer: B
NEW QUESTION 123
A company must introduce a scalable network automation tool to deploy, configure, and manage thousands of network device and service. The company servers already have been security-hardened and must not have any additional software installed on team. The security policy mandates the use of a secure communication protocol that support authentication and encryption for managing the servers. Which two automation tools must be used to meet these requirements? (Choose two.)
- A. Puppet
- B. Ansible
- C. Chef
- D. CFEngine
- E. Saltstack
Answer: A,E
NEW QUESTION 124
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 125
......
Do You Know How To Prepare For the Cisco 300-610 Exam?
Is Cisco 300-610 Exam Necessary? Here is What You Need To Know
Taking the Cisco 300-610? Here is Your Study Plan: a guide to help people prepare for their Cisco 300-610 exam
Cisco 300-610 exam is designed to challenge your skills and knowledge. In order to pass the Cisco 300-610, you will need to prepare for it. This article gives you the necessary information about what is on the exam and how it is structured. Knowledge of this material is crucial for getting a good score on the test. 300-610 Dumps is an exam that is taken to assess the knowledge and understanding of a person who has passed the 300-610 exam. This article gives you a guide to help you prepare for the Cisco 300-610 exam. We will cover the topics of the exam in detail so that you can learn everything about it.
Download Latest & Valid Questions For Cisco 300-610 exam: https://actual4test.exam4labs.com/300-610-practice-torrent.html