[2024] Pass your 300-710 exam with this 100% Free 300-710 Braindump
View All 300-710 Actual Exam Questions, Answers and Explanations for Free
Cisco 300-710 exam is suitable for security professionals, network engineers, and IT professionals who want to advance their careers in network security. Securing Networks with Cisco Firepower certification provides an opportunity for candidates to acquire new skills and knowledge, making them more valuable to employers. Securing Networks with Cisco Firepower certification also helps professionals to stay up-to-date with the latest network security technologies and trends.
NEW QUESTION # 135
Refer to the exhibit.
An administrator is looking at some of the reporting capabilities for Cisco Firepower and noticed this section of the Network Risk report showing a lot of SSL activity that cloud be used for evasion. Which action will mitigate this risk?
- A. Use Cisco AMP for Endpoints to block all SSL connection
- B. Use SSL decryption to analyze the packets.
- C. Use Cisco Tetration to track SSL connections to servers.
- D. Use encrypted traffic analytics to detect attacks
Answer: B
NEW QUESTION # 136
Refer to the exhibit. What must be done to fix access to this website while preventing the same communication to all other websites?
- A. Create an intrusion policy rule to have Snort allow port 443 to only 172.1.1.50.
- B. Create an access control policy rule to allow port 80 to only 172.1.1.50.
- C. Create an intrusion policy rule to have Snort allow port 80 to only 172.1.1.50.
- D. Create an access control policy rule to allow port 443 to only 172.1.1.50.
Answer: B
NEW QUESTION # 137
A network administrator is seeing an unknown verdict for a file detected by Cisco FTD. Which malware policy configuration option must be selected in order to further analyse the file in the Talos cloud?
- A. Sandbox analysis
- B. Spero analysis
- C. Dynamic analysis
- D. Malware analysis
Answer: D
NEW QUESTION # 138
What is the maximum bit size that Cisco FMC supports for HTTPS certificates?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config- guide-v61/system_configuration.html
NEW QUESTION # 139
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass Which default policy should be used?
- A. Connectivity Over Security
- B. Security Over Connectivity
- C. Balanced Security and Connectivity
- D. Maximum Detection
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusio
NEW QUESTION # 140
Which two remediation options are available when Cisco FMC is integrated with Cisco ISE? (Choose two.)
- A. dynamic null route configured
- B. port shutdown
- C. DHCP pool disablement
- D. quarantine
- E. host shutdown
Answer: B,D
Explanation:
Section: Integration
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/210524-configure- firepower-6-1-pxgrid-remediati.html
NEW QUESTION # 141
A network administrator reviews the file report for the last month and notices that all file types, except exe.
show a disposition of unknown. What is the cause of this issue?
- A. A file policy has not been applied to the access policy.
- B. The Cisco FMC cannot reach the Internet to analyze files.
- C. Only Spero file analysis is enabled.
- D. The malware license has not been applied to the Cisco FTD.
Answer: A
Explanation:
Explanation
A file policy defines the actions that the Cisco Firepower Threat Defense (FTD) device should take when it encounters different types of files. The file policy is applied as part of an access control policy. If an access control policy does not include a file policy, the FTD device will not take any action on the files it encounters, resulting in a disposition of "unknown" for all file types except exe.
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/219759-configure-bypass-policies-on-the-c
NEW QUESTION # 142
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)
- A. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
- B. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
- C. The system performs intrusion inspection followed by file inspection.
- D. File policies use an associated variable set to perform intrusion prevention.
- E. They can block traffic based on Security Intelligence data.
Answer: A,E
NEW QUESTION # 143
Which interface type allows packets to be dropped?
- A. passive
- B. inline
- C. ERSPAN
- D. TAP
Answer: B
NEW QUESTION # 144
In a Cisco AMP for Networks deployment, which disposition is returned if the cloud cannot be reached?
- A. disconnected
- B. clean
- C. unknown
- D. unavailable
Answer: D
Explanation:
Section: Integration
Explanation/Reference:
NEW QUESTION # 145
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 146
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Explanation
Explanation
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/firepower_management_center_high_availability.html#id_32288
NEW QUESTION # 147
An engineer is configuring a second Cisco FMC as a standby device but is unable to register with the active unit. What is causing this issue?
- A. The licensing purchased does not include high availability
- B. The code versions running on the Cisco FMC devices are different
- C. The primary FMC currently has devices connected to it.
- D. There is only 10 Mbps of bandwidth between the two devices.
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/firepower_management_center_high_availability.html
Answer: B
NEW QUESTION # 148
An organization has a Cisco IPS running in inline mode and is inspecting traffic for malicious activity. When traffic is received by the Cisco IRS, if it is not dropped, how does the traffic get to its destination?
- A. It is routed back to the Cisco ASA interfaces for transmission.
- B. It is transmitted out of the Cisco IPS outside interface.
- C. It is retransmitted from the Cisco IPS inline set.
- D. The packets are duplicated and a copy is sent to the destination.
Answer: A
NEW QUESTION # 149
A Cisco FTD device is running in transparent firewall mode with a VTEP bridge group member ingress interface. What must be considered by an engineer tasked with specifying a destination MAC address for a packet trace?
- A. The output format option for the packet logs is unavailable.
- B. The VLAN ID and destination MAC address are optional.
- C. Only the UDP packet type is supported.
- D. The destination MAC address is optional if a VLAN ID value is entered.
Answer: D
NEW QUESTION # 150
Which license type is required on Cisco ISE to integrate with Cisco FMC pxGrid?
- A. base
- B. plus
- C. apex
- D. mobility
Answer: B
NEW QUESTION # 151
What is a characteristic of bridge groups on a Cisco FTD?
- A. In routed firewall mode, routing between bridge groups is supported.
- B. In transparent firewall mode, routing between bridge groups is supported
- C. Routing between bridge groups is achieved only with a router-on-a-stick configuration on a connected router
- D. In routed firewall mode, routing between bridge groups must pass through a routed interface.
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa97/configuration/general/asa-97-general-config/intro-fw.pdf
NEW QUESTION # 152
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 153
A network administrator reviews me attack risk report and notices several Low-Impact attacks. What does this type of attack indicate?
- A. The host is not vulnerable to those attacks.
- B. All attacks are listed as low until manually categorized.
- C. The host is not within the administrator's environment.
- D. The attacks are not dangerous to the network.
Answer: A
Explanation:
Explanation
A low-impact attack indicates that the host is not vulnerable to those attacks. A low-impact attack is an attack that does not exploit any known vulnerability on the target host or does not match any signature or anomaly rule on the FTD device5. A low-impact attack does not mean that the attack is not dangerous to the network or that the host is not within the administrator's environment. It simply means that the attack did not succeed in compromising or affecting the host.
The other options are incorrect because:
All attacks are not listed as low until manually categorized. The FTD device automatically assigns an impact level to each attack based on various factors, such as vulnerability information, threat score, and confidence rating5. The impact level can be high, medium, or low, depending on how likely and how severe the attack is.
The attacks are not necessarily harmless to the network. A low-impact attack may still cause some damage or disruption to the network, such as consuming bandwidth, generating noise, or distracting attention from other attacks6. A low-impact attack may also indicate that the attacker is probing or scanning the network for potential vulnerabilities or weaknesses7.
The host is not necessarily outside the administrator's environment. A low-impact attack can target any host on the network, regardless of its location or ownership. A low-impact attack does not imply that the host is external or irrelevant to the administrator's environment.
NEW QUESTION # 154
Which CLI command is used to control special handling of clientHello messages?
- A. system support ssl-client-hello-display
- B. system support ssl-client-hello-reset
- C. system support ssl-client-hello-tuning
- D. system support ssl-client-hello-force-reset
Answer: B
NEW QUESTION # 155
An engineer is using the configure manager add <FMC IP> Cisc402098527 command to add a new Cisco FTD device to the Cisco FMC; however, the device is not being added. Why Is this occurring?
- A. DONOTRESOLVE must be added to the command
- B. The IP address used should be that of the Cisco FTD. not the Cisco FMC.
- C. The NAT ID is required since the Cisco FMC is behind a NAT device.
- D. The registration key is missing from the command
Answer: C
NEW QUESTION # 156
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize that you need to manually upload an MIB for the Cisco FMC. In which folder should you upload the MIB file?
- A. /etc/sf/DCMIB.ALERT
- B. /etc/sf/DCEALERT.MIB
- C. system/etc/DCEALERT.MIB
- D. /sf/etc/DCEALERT.MIB
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa- firepower-module-user-guide-v541/Intrusion-External-Responses.pdf
NEW QUESTION # 157
......
300-710 dumps Free Test Engine Verified By It Certified Experts: https://actual4test.exam4labs.com/300-710-practice-torrent.html