1Z0-1032-21 PDF Exam Material 2022 Realistic 1Z0-1032-21 Dumps Questions
Updated Oracle 1Z0-1032-21 Dumps – PDF & Online Engine
NEW QUESTION 42
Which statement describes the requirements to set up a Responsys primary data gateway solution for the secure transferring of data?
- A. The Responsys Data Gateway consists of a dedicated database server that can be accessed securely using a VPN setup specifically for a client account.
- B. The Responsys Data Gateway consists of only an API layer, using AuthO authentication to transfer data.
- C. To install the Responsys Data Gateway, you provide each client an encryption appliance that is configured to directly connect to their Responsys database instance. All data transfer occurs through the appliance.
- D. The Responsys Data Gateway requires a dedicated SFTP account that isaccessed via a secure shell (SSH2) protocol. A customer must provide a public SSH2 key for authentication.
Answer: D
NEW QUESTION 43
Before moving a campaign to production you need to test whetherthe links are working properly.
What functionality should you use in Responsys?
- A. Using RPL, use the clickthrough() method to iterate throughthe associated link table and test that they do not retrieve 404 errors.
- B. In the Testing section of a campaign Workbook, there is a Test links button that can automate this process.
- C. In Program, you can use the Test tab because it will display any issues with links according to a campaign.
- D. You should test all links manually.
Answer: C
NEW QUESTION 44
You are designing a program that requires the use of a value that is not stored in the Responsys data model and is only temporarily required for use in the program.
What could you use to fulfill this requirement?
- A. Custom SQL Variable
- B. Temporary Value Variable
- C. Entry Tracking Variable
- D. Get Data Variable
- E. ORA Variable
Answer: A
NEW QUESTION 45
Your new Responsys customer wants to begin sending email campaigns.
Which three practices should they employee for their IP address warm-up process? (Choosethree.)
- A. Establish an initial reputation with each major ISP by demonstrating that you are sending to valid email addresses with very few complaints or hard bounces.
- B. Minimize complaints and bounces to establish a good reputation with each ISP.
- C. Establish volume levels going through your major ISPs as quickly as possible so you can begin reaching your subscribers without suffering declines in response rates.
- D. Send carefully planned content to highly engaged recipients.
- E. Test out a new re-engagement email campaign by sending emails to lapsed or nonengaged subscribers.
Answer: A,B,D
NEW QUESTION 46
A third-party system exportof data that is required to be imported as supplemental table data in Responsys is in XML format. The XML file is located on the SFTP server and ready for you to configure the Connect import job in Responsys.
What is your next step?
- A. Create an Import Supplemental Table job in Responsys for this file.
- B. Create an Import Supplemental Table job in Responsys for this file and ensure to select the XML to CSV conversion check box.
- C. Discuss with theteam that Responsys doesn't accept XML formatting for importing Supplemental Table data and a solution to transform the data will be required.
- D. Create an Import Supplemental Table job in Responsys for this file and select XML as the Fields are delimited check box.
Answer: C
NEW QUESTION 47
When you add a Conversion Tracking Tag to a Conversion Acknowledgement page, each time a visitor completes a transaction, conversion credit will be attributed to the sourcing campaign by default.
Which name-value pair should you append to the Conversion Tracking Tag to clear the cookie in order to eliminate potential duplicate reporting?
- A. tracking=first
- B. action=once
- C. action=single
- D. tracking-once
- E. action=last
Answer: D
NEW QUESTION 48
You have a requirement to create a program that allows for the same RIID_ to have multiple enactments in it, each with a unique enactment value.
What should you use to accomplish this?
- A. Custom SQL Variable
- B. This is not possible, because RIID_ is the only variable that can be used as an identifier for a program.
- C. This is not possible, because only one RIID_ can be in a program at a time.
- D. Custom Event
- E. EntryTracking Variable
Answer: E
NEW QUESTION 49
Your client's requirements state that they need to have more than one profile list in their account.
Which two statements are true about implementing this? (Choose two.)
- A. Special configuration must be done to use different IP addresses to send campaigns to different lists in the account.
- B. If you have multiple profile lists, you must have separate programs, because allthe messaging events launched in a Responsys Program must refer to the same profile list.
- C. The column to be used as the table's primary key must be named something different in each profile list.
- D. It is acceptable to have the same individual (email subscriber) in several profile lists, because a record with the same email address can exist in multiple lists with different RIID_'s.
Answer: A,B
NEW QUESTION 50
How can you share a copy of a campaign with key stakeholders at live launch time?
- A. Export the campaign from Message Designer, then copy and paste the source HTML in an email to send to them.
- B. Use the RPL proofLaunch () method with each of the recipient's email addresses as a parameter.
- C. Create a Seed Group with their email addresses. In the Audience Selection section of the Campaign Workbook, select this group as your Seed List.
- D. Create a Proof List with their email addresses and then use the Seed List feature in the Campaign Workbook.
- E. Create a filter for these individuals and then use the Seed List feature in the Campaign Workbook.
Answer: C
NEW QUESTION 51
Your client wants to be able to analyze the marketing campaign performance in Insight reports broken down by two criteria available in the profile list (Gender and Country). Youcreated the Segment Group following the directions in the Help documentation, but when you run the Insight reports, the Segment reports display
"undefined".
What is the reason for the failure?
- A. You did not declare the fields used to define the segmentgroups in the Data section of the campaign workbook.
- B. You did not select and assign the segment group in the Campaign settings of the campaigns to be analyzed bythe segment criteria before launching the campaign.
- C. You don't have the segment group feature enabled in the Account Administration settings.
- D. You should have created a corresponding filter for each rule set to be used to identify the segment group.
Answer: B
NEW QUESTION 52
You are creating a filter with many conditions in Filter Designer.
What functionality in Responsys should you use to guarantee that your rules execute as you want?
- A. Use the RPL syntax<priority> and </priority> tags and include the rules to execute first inside these tags.
- B. Use the Enclosures feature: drag-and-drop rules in the enclosure in Filter Designer.
- C. You can only order the rules in the top-down order in which Responsys willexecute them.
- D. Use the Parenthesis feature: drag-and-drop rules in the correct order between parenthesis in Filter Designer.
Answer: C
NEW QUESTION 53
You need to create four versions of the same campaign with different subject lines to see which one receives the most opens and clicks. You are using EMD to create thecampaign.
How should you do this with Responsys?
- A. Create one campaign. Then in the program, configure a winner selection element and a Send Email Campaign element for the campaign. Publish the campaign and then determine the winner in a few days.
- B. Create four campaigns. Then in the program, configure a winner selection element and a Send Email Campaign element for each campaign. Publish the campaign and then determine the winner ina few days.
- C. Create one campaign and configure the multivariate testing functionality available via the Version Test button in EMD of the campaign. Create a program that launches this campaign.
- D. Create four campaigns and configure the multivariate testing functionality available via the Version Test button in EMD for each campaign.
Answer: B
NEW QUESTION 54
Your customer would like an Entry Tracking Variable that is usually not stored. They want it for various programs and it should be stored in a PET table.
How should you achieve this?
- A. It is not possible to store an Entry Tracking variable in a PET table.
- B. Locate the Entry Tracking Variable in the supplemental table and write a SQL statement that inserts the value in the PET table.
- C. Locate the program with the Entry Tracking Variable and configure a Set Data to store the value in the specified PET table.
- D. Locate the program with the Entry Tracking Variable and configure a Get Data to store the value in the specified PET table.
Answer: B
NEW QUESTION 55
What three actions must you take to set up your new IP fordeliverability success with your major ISPs?
(Choose three.)
- A. Ensure that your warm-up audiencelists consist of recently opted-in, opened/clicked within the last few months, or are known brand advocates.
- B. Do everything possible to remove lapsed, bounced, or old email addresses to increase the possibility of getting your emails into the inbox.
- C. Automate the daily delivery of Insight Deliverability reports for your warm-up campaigns, especially the Feedback Loop reports to check on true spam complaint rates.
- D. Set up a backup IP address so you will get through to the inbox even if you are blocked by an ISP.
Answer: B,C,D
NEW QUESTION 56
Which statement is true about how you must configure a Responsys Profile list so you can beginsending Mobile SMS campaigns?
- A. You can use the same Profile list for mobile campaigns that you are currently using for email campaigns.
- B. You can only modify profile lists used for mobile campaigns through Connect uploads.
- C. You only need to define the COUNTRY_ code if you are sending SMS messages to subscribers outside of the default country setting for your account.
- D. All the data that you need to use to personalize mobile messages must be stored as columns in the Profile list.
Answer: A
NEW QUESTION 57
You discovered that your main competitor's employeesare subscribed to receive your promotional campaigns directly to their work email addresses.
What should you do in Responsys to prevent your campaigns from being sent to the work email addresses of the competitor's employees, although this is not a complete solution?
- A. Periodically run the scrub utility and delete all email addresses from your competitor's domain.
- B. In the Account Admin screen, select Define email domain rules and create an audience exclusion by entering the competitor's domain name.
- C. Search the list for the domain name of the competitor and select the block option for each user that is found.
- D. Create a Non-Competitor Program using Program Designer.
Answer: A
NEW QUESTION 58
There was an issuewith the Event Data Feed export because its output was comma delimited, but the requirement was for it to be tab delimited.
Where should you configure this specification?
- A. In the Account Administration screen, there is a section "Accepted Delimiters". Change this default to tab.
- B. In the export wizards, under the Source section, select the option "Comma delimited".
- C. In the Account Administration screen, there is a section "Fields are delimited by", Change this default to tab.
- D. In the Connect Event Data Export configuration, in the Target Field section, select the "Fields are delimited by" option.
Answer: D
NEW QUESTION 59
A subscriber opens an email with Conversion Tracking on, clicks a link, but does not purchase. The next day, this subscriberreceives a second email with Conversion Tracking on with a follow-up offer, clicks a link, but still does not purchase. The subscriber bookmarks the URL, and on the third day, returns to the webpage and finally makes a purchase.
Assuming the conversion cookie is not deleted, how will the transaction be tracked or attributed?
- A. Because the final purchase was made by a visit directly to the webpage, the purchase isconsidered a web transaction and no email attribution is registered.
- B. The purchase transaction is attributed to both email campaigns.
- C. The purchase transaction is attributed to the first campaign that the recipient opened and clicked.
- D. The purchase transaction is attributed to the second campaign (most recent) that the recipient opened and clicked.
Answer: D
NEW QUESTION 60
You created a specific filter for the individuals that you want to send a campaign to.
What are the steps to define this filter to be used in a campaign?
- A. Navigate to the Program Designer, open the program that uses the campaign, and select the filter from the Program Settings.
- B. Locate the campaign in the Manage Campaign section, navigate to the Campaigns workbook, and configure the filter in the Proofing section.
- C. Locate the campaignin the Manage Campaign section, navigate to the Campaigns workbook, and assign the filter in the Audiences section.
- D. Go to the Data Sources section, select the Filters tab, and then select the campaign from the listing.
- E. Navigate to the Program Designer, select the Testing tab, open the program that uses the campaign, and select the filter from the Program Settings.
Answer: C
NEW QUESTION 61
Your profile list is named CONTACTS. Your supplemental table is ORDERS with a Data Extraction Key of CUSTOMER_ID_ and a Primary Key of ORDER_ID, with TOTAL_ORDER_DOLLARS as a column. You design acampaign to display the ORDER_ID and TOTAL_ORDER_DOLLARS with a default value of 0 (zero) from the ORDERS table for each recipient in the target audience from your CONTACTS list.
What happens if there are multiple matches (more than one ORDER_ID) for a CUSTOMER_ID?
- A. When multiple matches with a record in the CONTACTS list exist in the ORDERS supplemental table, the first found match will be used in the campaign.
- B. Because multiple matches with a record in the CONTACTS list exist in the ORDERS supplemental table, no matching values will be pulled at all, and the default value of 0 (zero) will be used for every email generated.
- C. During the campaign worklist build, Responsys will pause and ask you to select the correct record to use for the campaign personalization.
- D. The campaign launch will error out when Responsys detects multiple matches with the CONTACI'S list from the ORDERS table.
Answer: B
NEW QUESTION 62
......
Oracle 1Z0-1032-21 Dumps PDF Are going to be The Best Score: https://actual4test.exam4labs.com/1Z0-1032-21-practice-torrent.html